Fill a bucket with water and mark the water level inside. Place the bucket on the steps or ledge of the pool, making sure it is submerged in the water to the same level as the pool. Turn off the pool pump and mark the water level on the outside of the bucket. Wait 24 hours with the pool pump off. After 24 hours, compare the water loss in the

My 42000L pool lost up to 4cm water level a day Fix-a-Leak worked like magic. Sealed leaks on unreachable return lines. Saved me R9000 that I was quoted for repairs which would have meant lifting deck/patio and digging up the pipes. Dederick

4. Low or High Filter Pressure. For most pools, the ideal sand filter pressure range is from 10 to 25 psi. An obstruction in the system or incorrect sand levels are often the cause for an increase or decrease in pressure. If the sand filter pressure drops below 10 psi, first check for a clog before the filter.

So if the water leaks down while the pool is closed, you will likely damage the cover. These covers cost a minimum of $900.00. With above-ground pools, the cover will get heavy and may pull the walls down. It is better to just remove the cover, you may want to loosen the cable or carefully cut the cover, so the ice on the cover doesn’t 1. Bypass the Filter. Fix-A-Leak will clog your filter fast. Set the Multiport valve to Recirculate, or for Push-Pull slide valves and Cartridge filters, remove the DE grids or filter sand, and reassemble the tank together tightly without the filter media. Be sure your chlorine level is on the high side, as you won’t be filtering for a few days. 2. 7KaI. 121 113 389 324 790 233 344 481

how to fix a leak in pool